Apiezon AP101 anti-seize vacuum grease (previously M018)
SKU: M1-AP101-00050 | Availability ⓘ
Apiezon AP101 anti-seize vacuum grease (previously M018)
SKU: M1-AP101-00050 | Availability ⓘ
AU $16000
AU $160.00
Regular price
Taxes and shipping applied at checkout.
/
Type 101 is an excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications.
Properties
- Anti-seize properties: AP 101 contains PTFE which confers superior anti-seize properties, providing long lasting lubrication and ensuring smooth operation of stop cocks and taps. The anti-seize properties are not limited to laboratory or glassware use, but are equally effective when used on metal equipment which may be subject to seizure or corrosion.
- Non-silicone grease: being hydrocarbon based, AP 101 does not suffer from the problems of "creep" or "carry over" which are traditionally associated with silicone greases. It reduces sample contamination and the risk of interference in analytical techniques such as infra-red and mass spectrometry.
- Solvent resistant: both PTFE and the lithium stearate gel base in AP 101 are insoluble in most solvents. They ensure that AP 101 shows resistance to water, alcohols, ketones and esters. In addition, AP 101 resists attack from aqueous acid and alkali solutions, alcoholic alkali solutions and corrosive gases.
- Wide temperature range: it can be used over a very wide range of temperatures, possessing its optimum consistency over the -15 to 150C temperature range, but is usable down to -40°C and, for limited periods, up to 180C.
- Under vacuum: AP 101 exhibits good vacuum properties, down to 10-4 torr.
- Easily remove AP 101 by wiping it with a soft cloth. Any residues of grease can be washed away with an aqueous glassware detergent.
Apiezon products:
Typical Property | AP101 | AP100 | H | L | M | N | T | |
---|---|---|---|---|---|---|---|---|
Main area of application |
General | Lubricating | Cryogenic | High Temp | High Vacuum | General Vacuum | Medium Temp | |
Melting Point: ASTM.D 566 |
°C °F |
>200 >392 |
42-52 108-126 |
does not melt | 42-52 108-126 |
40-60 104-140 |
42-52 108-126 |
112-137 233-278 |
Working temp. range | °C °F |
-40-180 -40-365 |
10-30 50-86 |
-10-240 14-464 |
10-30 50-86 |
10-30 50-86 |
-269-30 -452-86 |
10-120 50-248 |
Vapor Pressure Torr @20°C |
<1.0x10-5 | 7.0x10-11 | 1.7x10-9 | 7x10-11 | 1.7x10-9 | 6x10-10 | 4.6x10-9 | |
Relative Density 20°C | 0.981 | 1.042 | 0.918 | 0.896 | 0.894 | 0.911 | 0.912 | |
Radiation Resistance | No | No | No | Yes | Yes | No | No | |
Outgassing Characteristics ASTMS .E 595-90 |
TML CVCM |
- - |
<1.0% <0.1% |
<1.0% <0.1% |
<1.0% <0.1% |
- - |
<1.0% <0.1% |
- - |
Lubricity 4 Ball Test ASTM .D 2763 (IP 239), Kg |
450 | 450 | 250 | 150 | 140 | 150 | - | |
Viscosity of molten grease, cP |
50°C 100°C |
- - |
- - |
- - |
766 62.3 |
413 29.8 |
- - |
- - |
Coefficient of expansion per °C over 20°C-30°C |
0.00066 | - | - | 0.00076 | 0.00075 | 0.00072 | 0.00073 | |
Thermal conductivity, w/m°C |
- - |
- - |
- - |
0.216 - |
0.194 - |
0.194 0.095 |
- - |
|
Latent heat of fusion, cal/g |
- | - | - | 15.1 | 18.7 | 15.0 | - | |
Fusion Peak °C | - | - | 25 | 32 | 34 | 31 | * | |
Vol. resistivity, cm | - | - | - | 1.2x1016 | 2.6x1016 | 2.0x1016 | 3.3x1012 | |
Permittivity | - | - | - | 2.3 | 2.1 | 2.3 | 2.3 | |
Loss tangent | - | - | - | <0.0001 | <0.0001 | <0.0001 | <0.0001 | |
Surface breakdown at flash over, kV |
- | - | - | 24 | 28 | 27 | 24 | |
Electric strength, V | - | - | - | 730 | 850 | 820 | 730 |